Fishing can be regarded as part of the most amazing outdoor activities an individual can ever be involved in. This action is however fun only if one is actually catching the fishes. To make this happen, it is essential that all factors related to the fishing are prepared correctly. For instance, when the fishes being caught are stripers, an individual must know how to organize the striper lures. During the making of a lure if it is for a striper or any other fish, one must always learn how to make the best knot.
The things that a person will need when they are learning how to tie a lure are fishing rods and reel and the lure itself. When doing this, it is recommended that they start the process with an extra-long line because they will need some extra slack. The next thing is to double over around five inches of line just like it is done when tying shoe laces.
The second step is to let the whole loop pass through the lure very carefully so that it does not get undone. After doing this, there should be two sections through the eye of the lure. After completing the second step, another overhead look just like the first should be tied. To make sure it is tight, the ends should be pulled in the opposite directions and later trim off the excess line.
When trying this action, there are some warnings and guidelines that may be very valuable. First and foremost, a person must make certain that they know about the tag end that is supposed to be hanging to the end whereas the other length should be hanging slackly on the bar. They should also take into deliberation that wetting the loops with a little saliva can help them to be much stronger.
It is important to know that burning the ends of the knots makes them weaker; they are supposed to trim them instead. They should give themselves enough leeway on the tag that will be easier to work with. They should be very careful not to hook themselves when they are tugging on the tag line to tighten the knot.
Learning how to make the lures is not the only important thing when going fishing. One must also know the best bait to be used on the lures. For instance, the shad is possibly the most commonly used bait by fishers. Shad can be found below or at the end of dams. It can be identified by its silver body with a green back and large scales. One must pick the shads that are around four inches.
Another good example of baits for catching fish are the American eels. This is a worm with a snake looking body and very sharp teeth. They have very tiny and sharp-pointed heads. They may be found in many water sheds, rivers, ponds, streams and other places. They are tempting to stripers hence good for bait.
After learning all the things that have been listed above, it will be very easy to have fun while fishing with family or friends. If a person does the right thing, the problem will not be catching the fish but choosing which ones to take home.
The things that a person will need when they are learning how to tie a lure are fishing rods and reel and the lure itself. When doing this, it is recommended that they start the process with an extra-long line because they will need some extra slack. The next thing is to double over around five inches of line just like it is done when tying shoe laces.
The second step is to let the whole loop pass through the lure very carefully so that it does not get undone. After doing this, there should be two sections through the eye of the lure. After completing the second step, another overhead look just like the first should be tied. To make sure it is tight, the ends should be pulled in the opposite directions and later trim off the excess line.
When trying this action, there are some warnings and guidelines that may be very valuable. First and foremost, a person must make certain that they know about the tag end that is supposed to be hanging to the end whereas the other length should be hanging slackly on the bar. They should also take into deliberation that wetting the loops with a little saliva can help them to be much stronger.
It is important to know that burning the ends of the knots makes them weaker; they are supposed to trim them instead. They should give themselves enough leeway on the tag that will be easier to work with. They should be very careful not to hook themselves when they are tugging on the tag line to tighten the knot.
Learning how to make the lures is not the only important thing when going fishing. One must also know the best bait to be used on the lures. For instance, the shad is possibly the most commonly used bait by fishers. Shad can be found below or at the end of dams. It can be identified by its silver body with a green back and large scales. One must pick the shads that are around four inches.
Another good example of baits for catching fish are the American eels. This is a worm with a snake looking body and very sharp teeth. They have very tiny and sharp-pointed heads. They may be found in many water sheds, rivers, ponds, streams and other places. They are tempting to stripers hence good for bait.
After learning all the things that have been listed above, it will be very easy to have fun while fishing with family or friends. If a person does the right thing, the problem will not be catching the fish but choosing which ones to take home.
About the Author:
If you are looking for the best striper lures come to Guides Secret. To check out our professional like of fishing gear, visit us at http://store.guidessecret.com today.
EmoticonEmoticon